Loading ...
Loading ...
Loading ...
INSTALLATION
8. Electrical connection
Check that the installation complies with the standards
of local building, gas and electrical authorities. Before
connecting to the mains supply ensure that the mains
voltage corresponds to the voltage on the rating plate
inside the rangehood.
9. Fix telescopic flue cover to the wall mounting bracket
with screws supplied. Ensure that the upper section
is extended.
Fig. 15
Fig. 16
Care must be taken to ensure the screws (supplied in
accessories bag) are not crosss threaded when attaching
the upper flue cover. If installed in recirculating mode,
insert the optional carbon filter (inclued in recirculation
kit AR610RK). To complete the cooker hood installation,
insert the three filters to the underside of the hood body.
Place back edge of filter into position and push up front
edge so that the filter clips into place.
Your Electrolux cooker hood is now ready to use.
IMPORTANT!
10.
Insert the glass into the slot on the main body as show
in Fig.17, then pull the latchs to inner side, same time
push the glass in place (Fig.18).
* Please remove the grease filter before installing the glass.
* We recommend that two people carry out this installation
step.
Side view
Fig. 17
Fig. 18
11
Loading ...
Loading ...
Loading ...