Loading ...
Loading ...
Loading ...
10
soft foam packaging or similar material to
avoid damaging the backboard of the
refrigerator. To reverse the door, the
following steps generally recommended.
1. Stand the refrigerator upright. Open the
door to take out all door racks (to avoid
damage) and then close the door.
Caution!
Please slightly squeeze the door rack
from two sides toward center and inside
of door rack, and then move it upward
when taking out the upper rack and
lower rack.
2. Remove right upper hinge cover
①
top of the cabinet. Remove the
temperature sensor from the cabinet
and right upper hinge cover , Install it on
the left upper hinge cover. Remove the 3
screws
②
which are used for fixing the
right upper hinge part (see the picture
below) and take down the upper hinge
parts
③
3. Remove screw cover from the
left-front corner of cabinet with
thin-blade screwdriver and install screw
cover-right to the right front corner. Put
the upper hinge cover(right) into the
plastic bag.
4. Remove the upper door from the
middle hinge by carefully lifting the door
straight up.
5. Place the upper door on a smooth
surface with its panel upwards.
Loose screw
③
and take down part
②
and part
①
, Install replacement
door stopper-left provided (in the
plastic bag attached) and left stop
block to the left side with screw
③
.
Keep part
①
and
②
with the
appliance for future reference.
Loading ...
Loading ...
Loading ...