Loading ...
Loading ...
Loading ...
23 / EN
Dryer / User Manual
Operating your dryer
5.13 Changing the program
after it is started
After the machine starts running, you can
change the program you selected to dry your
laundry with a dierent program.
1. For example, to select Extra Dry program
nstead of the Iron Dryness, stop the
program by pressng the Start / Pause
button.
2. Turn the Program Selecton knob to
select the Extra Dry program.
3. Start the program by pressng the Start /
Pause button.
Adding and removing laundry in
stand-by mode
If you want to add or remove laundry after
the drying program starts:
1. Press the Start/Pause button to take
the machne nto Stand-by mode. Dryng
operaton stops.
2. Open the loadng door, add or remove
laundry and close the loadng door.
3. Start the program by pressng the Start /
Pause button.
C
The laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the wet
laundry and the laundry to remain
damp after the operation ends..
C
Laundry adding and removing can
be repeated as much as desired
during drying operation.
But this process would
continuously interrupt the
drying operation, and so would
cause the program duration
to lengthen and increase
energy consumption. Thus, it is
recommended to add laundry
before the program starts.
C
If a new program is selected by
changing the position of the
program selection knob while
your machine is in stand-by
mode, the running program ends.
Canceling the end duration function
If you want to cancel the end duration set-
ting countdown and start the program right
away:
1. Cancel the program by pressng the On/
Off button. Turn on the dryng machne
agan by pressng the On/Off button.
When your dryng machne turns on
for the frst tme, t turns on wth the
declaraton (cotton wardrobe dryness)
program.
2. Select the program you desre usng the
Program Selecton knob.
3. Start the program by pressng the Start /
Pause button.
5.11 Starting the program
Start the program by pressing the Start /
Pause button.
Start/Pause LED and the Drying LED light up,
indicating the program started. The “:” sign in
the middle of the remaining duration starts
to blink.
5.12 Child Lock
The machine features a child lock which pre-
vents the machine program ow from being
aected when buttons are pressed during
operation.
When the Child Lock is active, all buttons ex-
cept for the On/O button are deactivated.
To activate the child lock, press the Sound
Notication button and End Duration button
simultaneously for 3 seconds.
The child lock should be deactivated to be
able to start a new program after the current
program ends or to be able to interfere with
the current program. Keep the same buttons
pressed for 3 seconds again to deactivate the
child lock.
C
The lock LED on the screen
lights up when the Child Lock is
activated.
C
Child Lock deactivates when the
machine is turned off and on
again using the On/Off button.
A warning sound is heard when any button
is pressed (except for On/O button) or the
Program Selection knob is turned while the
child lock is active.
Loading ...
Loading ...
Loading ...