Loading ...
Loading ...
Loading ...
14
GB
Connecting a flexible jointless stainless steel pipe to a
! Only use pipes and seals that comply with current
national regulations.
Checking the tightness of the connection
! When the installation process is complete, check the
Table 1 Natural Gas Adjusting the burner’s
Fast (R)
Semi Fast (S)
Burner
(mm) (G20)
125
100
72
(mm)
4.7
2.6
2
286
157
95
Burner and nozzle specifications
A
S
R
S
Ensure pipes do not touch any moving parts and are not
compressed.
threaded attachment
Suitable for connection with a flexible hose assembly. The flexible hose
assembly must be certified to AS/NZS 1869 class B or D, be of
appropriate internal diameter for the total gas consumption, be kept as
short as possible (not exceeding 1200mm), must not be in contact with
the floor or any hot or sharp surfaces. The hose assembly must not be
subject to strain, abrasion, kinking or deformation.
pipe fittings for leaks using a soapy solution. Never use a
flame.
Operation of the appliance must be tested by the installer before leaving.
Check all burner flames are blue in colour, stable and completely ignite
at both high and low flame settings with no appreciable yellow tipping,
carbon deposition, lifting, floating, lighting back or objectionable odour.
Test burners individually and in combination.
For other minor adjustments or if the appliance does not
perfrom correctly; contact Arisit Pty Ltd 1300 762 219
Auxiliary (A)
Test point pressure 1.0 kPa with both Semi Fast
Burner Gas Consumption Injector
(mm) (
MJ/h)
1/100
(
1.0kPa
)
primary air
Nomin.
157
7.5
132
5.
0
110
2.5
burners operating on high
Place the supplied duplicate data plate to a suitable adjacent surface or within the instruction manual for future reference.
Loading ...
Loading ...
Loading ...