Loading ...
Loading ...
Loading ...
18
HOW TO CHARGE THE BATTERY
The Hom Bot returns to the home station at the end of a cleaning
cycle or when its battery is running low.
※
If 10 minutes elapse without the Hom Bot moving or the battery is
too low, the Hom Bot will automatically go into standby mode.
※
The power switch has to be in the ON position in order for the
Hom Bot to charge.
※
After the battery is fully charged, the Hom Bot will continue
cleaning in the nearest area that has not yet been cleaned.
※
If Hom Bot is unable to dock to the home station on its first
attempt, it will try again until it docks successfully.
※
When the Hom Bot has finished cleaning the area, it will return to
the home station, even if the battery level is not low.
Manually charge the Hom Bot before using it for the first time.
Method 1. Attach the Hom Bot to the home station
by aligning it to the front side of the home
station. A melody sound will sound along
with an audio message to start charging.
※
The main power switch must be in the
ON position in order for the Hom Bot to
charge. A voice command that says "Main
power switch on the back of the Hom Bot
is turned off. Please turn the switch on"
if the power switch is in the OFF position
while mounted to the home station.
Method 2. When the HOME button is pressed, on either
the Hom Bot or remote control, the Hom Bot
will return to the home station to charge.
※ If the Hom Bot did not start cleaning from the home station or if the Hom Bot is manually charged by
pressing the Home button, it may take slightly longer to nd the home station when cleaning has nished
or for battery charging.
※
If the Hom Bot is within 3.98 in. of the front of the charging terminal while the power supply is turned on,
it will automatically return to the home station and charging will begin.
Automatic charging
Manual charging
Take the following precautions when using the home station:
• If foreign material is caught in the charging terminal, charging may not proceed smoothly.
Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.
• To prevent electric shock or damage to the home station, do not touch the charging terminal
with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the home station or power plug near a heating source.
Tip
Loading ...
Loading ...
Loading ...