Loading ...
Loading ...
Loading ...
Cleaning en
15
Proceed as follows:
1. Switch on the Super function approx.
4 hours before defrosting.
This means that the food reaches
very low temperatures and it can be
stored for longer at room
temperature.
2. Remove the frozen food and place
temporarily in a cool location.
3. Switch off the appliance.
4. Pull out the mains plug or switch off
the fuse.
5. To accelerate the defrosting
process: place a pan of hot water on
a trivet in the freezer compartment.
6. Wipe up the condensation water with
a cloth or sponge.
7. Wipe the freezer compartment dry.
8. Switch on the appliance.
9. Put the frozen food back into the
appliance.
D Cleaning
Cleaning
Caution!
Avoid damaging the appliance and the
fittings.
■ Do not use abrasive, chloride or
acidic cleaning agents or solvents.
■ Do not use scouring or abrasive
sponges.
The metallic surfaces may corrode.
■ Never clean the shelves
or containers in the dishwasher.
The parts may become deformed.
Proceed as follows:
1. Switch off the appliance.
2. Pull out the mains plug or switch off
the fuse.
3. Take out the food and store in a cool
location.
If present: place ice pack
on the food.
4. If present: wait until the layer of frost
has thawed.
5. Clean the appliance with a soft cloth,
lukewarm water and a little
pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into
the light or through the drainage
hole into the evaporation area.
6. Wipe door seal with clear water and
dry thoroughly with a cloth.
7. Reconnect and switch on appliance
and put in food.
Cleaning the equipment
To clean, take the variable parts out of
the appliance.
~ "Interior fittings" on page 9
Condensation channel
~ Fig. )
Regularly clean the condensation
channel and drainage hole with a cotton
bud or similar implement to ensure that
the condensation can drain.
Loading ...
Loading ...
Loading ...