Loading ...
Loading ...
Loading ...
9
Care and Cleaning
Cleaning the Burners and Igniters
WARNING
Use care while cleaning the igniters. The porcelain is fragile and can
crack or break.
IMPORTANT: The igniters will not work properly if they or the other
burner parts are not clean. Dirty/wet igniters may not spark at all.
1. Disassemble the burners, and check for any dirt/grime on the
individual parts, including the igniters.
2. Clean completely around the igniter, including over and under
the edge of the metal top and porcelain base. (A toothbrush
with firm bristles is ideal for this task.)
Porcelain is fragile and can crack or break. Do not use water to
clean the igniters. If needed, use a small amount of rubbing
alcohol to help dissolve grime. The alcohol will evaporate.
3. On the burner bases, remove anything stuck in the holes with
a straightened paper clip, wire, or needle.
Do not to scratch or damage the ring and head, or distort the
burner holes. The SimmerSear™ burner base is not removable.
4. With a plastic-bristled brush or firm-bristled toothbrush,
clean all burner parts with window cleaner or rubbing alcohol.
When done, rinse the parts well with clean water, and dry all
the parts thoroughly.
5. Reassemble the cooktop according to the burner and grate
assembly instructions on Pgs. 4 – 5.
6. Test the functions of all burners.
If the flame is uneven, verify proper assembly, then check
for residual dirt/grime on all burner parts, verify all parts are
thoroughly dry, and retest.
If problems remain, call a Dacor Authorized Service Agent.
Cleaning Stainless Steel Surfaces
WARNING
Always wipe stainless steel surfaces with the grain. To prevent
scratches, do not use abrasive cleaners or scrubbers on stainless
steel surfaces.
• Clean only stainless steel surfaces with the Dacor Stainless
Steel Cleaner included with your cooktop.
• Additional stainless steel cleaner is available at www.every-
thingdacor.com, part# A302.
• You can also clean stainless steel surfaces with a mild solution
of liquid soap and warm water. Rinse and dry with a soft, lint-
free cloth.
Loading ...
Loading ...
Loading ...