Loading ...
Loading ...
Loading ...
ENGLISH
Connections (continued)
■
FM/AM loop aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
■
Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC
power lead of this unit into the wall socket. If you plug in the unit first, the unit
will enter the demonstration mode (see page 10).
Note:
Unplug the unit if it will not be used for a prolonged period of time.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
■
Speaker connection
Main terminals:
Connect the lower black wire to MAIN(-) terminal and the blue wire to the
MAIN(+) terminal.
Subwoofer terminals:
Connect the upper black wire to the SUBWOOFER(-) terminal and the red
wire to the SUBWOOFER(+) terminal.
Incorrect
,
Right speaker
Left speaker
,
Black
Red
Blue
Caution:
● Never mistake the MAIN and the SUBWOOFER terminals.
The unit or the speakers may be damaged.
● Only the included speakers should be used with this product.
Do not use other speakers with this unit or use the supplied
speakers with other units.
● Do not mistake the right and the left channels.
The right speaker is the one on the right side when you face the
unit.
● Do not let the bare speaker wires touch each other.
● Do not stand or sit on the speakers. You may be injured.
Position the FM aerial wire and rotate the AM loop aerial for optimum reception. Place
the AM loop aerial on a shelf, or attach it to a stand or a wall.
Notes:
● Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
● Do not connect the attached FM aerial to an external FM aerial. Otherwise, trouble
may occur.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Screws
(not supplied)
Wall
Preparation for Use
– System Connections –
■ Demonstration mode (See page 10.)
E-8
Loading ...
Loading ...
Loading ...