Loading ...
Loading ...
Loading ...
−
−
−
You can use any of five methods to
find radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
Use the TUNE knob to
tune the radio to a desired frequency.
Turn the knob to the right to tune to
a higher frequency, and turn it to the
left to tune to a lower frequency.
The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.
If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
press the SCAN button again.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM or
FM button (the AM/FM button on
premium audio system). Adjust the
volume by turning the power/
volume knob.
The band and frequency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button (AM/FM button on
premium audio system). On the FM
band, ST will be displayed if the
stationisbroadcastinginstereo.
Stereo reproduction in AM is not
available.
The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the or side of the
SEEK/SKIP button, then release it.
To Select a Station
TUNE
SCANTo Play the AM/FM Radio
SEEK
Audio System (Models without navigation system)
122
０７／０７／１１ １５：２３：５７ ３１ＳＶＡ６２０ ０１２７
2008 Civic Coupe
Table Of Contents
Main Menu
Loading ...
Loading ...
Loading ...