Loading ...
Loading ...
Loading ...
en PowerBoost function
14
Changing or deleting the time
Touch the
0 symbol repeatedly until the Ú indicator for
the desired hotplate lights up. Change the cooking time
or set it to ‹‹ using the @ or A symbol.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the
time program function display ‹‹ appears for
10 seconds. The Ú indicator on the hotplate lights up.
Pressing the 0 symbol turns off the indicators and
stops the beeping.
Notes
■ If a cooking time has been set for several hotplates,
the cooking time that was set last appears in the
timer display.
■ To select the remaining cooking time for a different
hotplate, touch the 0 symbol repeatedly until the
indicator for the desired hotplate lights up.
■ You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure:
1. The kitchen timer can be set in two different ways:
– When a hotplate is selected, touch the 0 symbol
repeatedly until the Ú display beside the
U symbol lights up.
– If no hotplate is selected, touch the 0 symbol.
The Ú display beside the U symbol lights up.
‹‹ appears in the timer display.
2. Touch the @ or A symbol. The basic setting
appears.
@ symbol: 10 minutes.
A symbol: 05 minutes.
3. Use the @ or A symbol to set the required time.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the symbol 0 repeatedly until the display Ú
lights up beside the symbol U. Change the time or use
the symbols @ or A to set the time to ‹‹.
Once the time has elapsed
A warning signal sounds. ‹‹ is displayed on the time
program function display. After 10 seconds the
indicators turn off.
Pressing the 0 symbol turns off the indicators and
stops the beeping.
vPowerBoost function
Po we r Bo o s t function
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat
setting Š.
The function can be used by any hotplate provided that
no other hotplates are switched on. Otherwise › and
the heat setting will flash in the heat setting display.
Activating
1. Select the required heat setting.
2. Touch the boost G symbol for the selected hotplate.
› lights up in the display.
The function is activated.
Notes
■ If a hotplate is switched on while the PowerBoost
function is active, › and the heat setting will flash in
the heat setting display; the heat setting that was
previously used will then be applied automatically
without activating the function.
■ In the combi zone, the PowerBoost function can only
be activated if the two hotplates are being used
independently of each other.
Deactivating
Touch the boostG symbol.
The › display goes out and the hotplate switches back
to the previously selected heat setting.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
Loading ...
Loading ...
Loading ...