CP.PT.000734 User Manual

Loading ...

Spark

User Manual

Obstacle Avoidance during RTH

Spark will Return to Home at a ight speed of 10 m/s and cannot avoid obstacles when RTH is triggered and

the aircraft is further than 100 m from the home point.

Spark can sense and actively attempt to avoid obstacles during RTH, provided that lighting conditions are

adequate enough for the 3D Sensing System and RTH is triggered when the aircraft is less than 100 m from

the Home Point. Upon detecting an obstacle, the aircraft will act as follows:

1. The aircraft decelerates when an obstacle is sensed at 16 ft (5 m).

2. The aircraft stops and hovers then starts ying backward until the 3D Sensing System cannot sense any

obstacles.

3. The aircraft ascends vertically for about ve seconds.

4. RTH procedure resumes. The aircraft will continue ying to the Home Point at the current altitude.

The aircraft cannot return to the Home Point when GPS signal is weak or unavailable.

It is important to set a suitable Failsafe altitude before each ight. Launch the DJI GO 4 app, tap

“GO FLY” and tap to set the Failsafe Altitude.

The aircraft will stop ascending and immediately return to the Home Point if you move the

throttle stick in the aircraft reaches 65 feet (20 meters) altitudes or beyond during Failsafe.

1 Record Home Point 2 Remote Control Signal Lost

5 Landing (After User Conrmation)

3 Signal Lost for Extended Time

4 RTH (Adjustable Altitude)

Height over HP<=Failsafe Altitude

Height over HP>Failsafe Altitude

Elevate to Failsafe Altitude

Failsafe Altitude

Hovering at 0.3 meters above the Home Point

2.5 m when the aircraft is between 3 m and 20 m from the Home Point.

c. The aircraft will land automatically if RTH is triggered and the aircraft is less than 3 m from the home

point.

5. The aircraft will hover 0.3 m above ground and wait for conrmation from the user. The aircraft will land

and stop its motors after user conrmation.

Ascends for ve seconds

5 m

Loading ...

CP.PT.000734 Dji Cameras