Loading ...
Loading ...
Loading ...
USE AND CARE
The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries
the dirt to the dust bag through the air
flow passages. The dust bag lets the air
pass through, while it traps the dirt. For
best cleaning results, keep the airflow
passage open. Check the starred areas
occasionally for clogs. Unplug from
outlet before checking.
NOTE: Do not stand canister body on its
end while operating or you will block the
exhaust vents.
WARNING
Personal Injury and Product Damage
Hazard!
• DO NOT plug in if switch isin ON
position. Personal injury or damage
could result,
• The cord moves rapidly when rewinding.
Keep children away and provide a clear
path when rewinding the cord to prevent
personal injury,
• DO NOT use outlets above counters.
Damage to items in surrounding area
could occur.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not change the plug in any way.
1. Pull out the power cord to the desired
length.
2. Plug power cord into a 120 Volt outlet
located near the floor.
Note: To rewind the cord when finished
vacuuming, first unplug the cleaner. Hold
the plug while rewinding to prevent
damage or injury from the moving cord.
Press on the cord reel button to rewind the
cord.
3. To start, push slide switch down toward
MAX. To stop, raise slide up to OFF.
OFF
-6-
Loading ...
Loading ...
Loading ...