Loading ...
Loading ...
Loading ...
Building in the appliance
35
Adjust the rear feet with a ratchet
(attachment: 5/16" (8mm) socket) or
a TX20 screwdriver.
Tip: Proceed carefully when adjusting
the feet, alternating between the left
and right feet.
Place a spirit level across the installa-
tion aids on the appliance door to
check the appliance’s alignment.
Unscrew the feet and on both
sides at least until the marking on the
toe-kick is aligned with the required
11/4" (32mm) on the spacer. The
standard dimension of 11/4" (32mm)
relates to a niche height of
84" (2,134mm).
It is important to align the feet to a
height of at least 11/4" (32mm) so
that the appliance's ventilation works
properly via the toe-kick.
Risk of damage!
Unscrew the feet only until the
marking on the toe-kick is aligned to
a maximum of 27/16" (62mm) (max.
niche height of 84" (2,164mm)).
Otherwise the rear foot adjustment
will be damaged.
Check the alignment of the appliance
again using installation aids and
the spirit level.
Loading ...
Loading ...
Loading ...