Loading ...
Loading ...
Loading ...
18
**The maximum additional water used for any combination of options is 4.8 gal. (18.2 L).
Dishwasher Control Section
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard
184 for Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments. Only sanitizing
cycles have been designed to meet the
requirements of the NSF/ANSI 184
performance standard for soil removal and
for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on
a NSF/ANSI 184 certified dishwasher meet
the NSF/ANSI 184 performance standard for
soil removal and for sanitization efficacy.
The Sani Rinse indicator indicates at the end
of the cycle whether the Sani Rinse option
was successfully completed. If the indicator
does not activate, it is probably due to the
cycle being interrupted.
SmartWash
®
Pots & Pans
Normal Wash
Top Rack Only
Increases the main wash
temperature from 120°F
(49°C) to 140°F (60°C) and
the final rinse from 140°F
(60°C) to 155°F (68°C).
0:05 to 1:01
0 to 2.6
(0 to 9.8
Smart Dry
Turns the heat element on at the end of the
wash cycle. Use rinse aid with or without the
Smart Dry option for best drying results.
Plastic items are less likely to deform when
loaded in the top dish rack.
Available with any
cycle except Quick
Rinse
Turns the heat element on at
the end of the wash cycle.
0:08 to 0:46 0
Top Rack Only
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Available with any
cycle
Cannot be used with
TurboZone
®
option
Slightly faster wash for
smaller loads
Saves up to
0:07
0
H
E
4 Hour Delay
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak
hours when possible.
To delay the start:
1. Select a wash cycle and options.
2. Press the 4 HOUR DELAY button.
3. Press START/RESUME.
NOTE: Anytime the door is opened for more than 5 seconds (such as, to add a dish), the Start/Resume button must be pressed
again to resume the delay countdown.
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When Locked is lit, all buttons are
disabled. The dishwasher door can still be opened/closed while the controls are locked.
To turn on Control Lock:
Press and hold TOP RACK ONLY for 3 seconds. Locked will light. If you press any pad while your dishwasher is locked, the light
flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off Control Lock:
NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL/DRAIN, or by opening and closing
the door before you are able to turn off Control Lock.
Press and hold TOP RACK ONLY for 3 seconds. The light turns Off.
Loading ...
Loading ...
Loading ...