Loading ...
Loading ...
Loading ...
10
4. Replace the burner base. Each round burner base is marked
with a letter indicating the burner size. See the following
illustration for burner positions.
5. Each round burner cap is marked with a letter indicating the
burner size. Replace the burner cap, making sure it is
properly aligned with the burner base. The burner cap should
not rock or wobble when properly aligned.
IMPORTANT: The bottom of the small and medium caps
are different. Do not put the wrong size burner cap on the
burner base.
Small cap (S) Medium cap (M) Large cap (L)
6. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, turn off the burner.
Do not service the burner yourself. Contact a trained repair
specialist.
EZ-2-Lift™ Hinged Cast Iron Grates
The grates must be properly positioned before cooking. In the
proper position, the grates should be flush and level. Improper
installation of the grates may result in chipping or scratching of
the cooktop.
Your cooktop comes with hinged grates for easier cleaning. The
grates pivot upward and toward the back of the cooktop for easy
access under the grates.
The grates will stop once they are moved to their vertical (fully
open) position. A 20" (50.8 cm) minimum clearance from the
countertop to the bottom of the upper cabinets/appliances is
needed to fully open the grates.
Be sure to return the grates to their normal (down) position once
cleaning is complete.
The grates are removable for cleaning.
To attach the grates to their hinges, insert the grate slot over the
hinge pin on the back of the cooktop. Be sure to keep the grate
angled above the cooktop to avoid scratching the cooktop until
the grate is seated on the hinge pin. Then position the grate
down onto the cooktop.
Although the burner grates are durable, they will gradually lose
their shine and/or discolor due to the high temperatures of the
gas flame.
Burner Size
Select a burner that best fits your cookware. See the following
illustration and chart.
A
D
C
B E
A. Small (S)
B. Large (L)
C. Oval D. Medium (M)
E. Large (L)
A
B
A. Incorrect
B. Correct
B
A
A. Bumpers
B. Alignment indentations
A
B
A. Grate slot
B. Hinge pin
Large
(most
powerful)
Front of Range
Oval
Loading ...
Loading ...
Loading ...