Loading ...
Loading ...
Loading ...
8
How to Use
Volume Control
- Slide the VOLUME switch to the + or - position to adjust the speaker volume.
- To prevent hearing loss, which is caused by listening to music for long periods
of time, the HBS-760 will emit a long beep tone or two beeps when you use the
upper 6 volume levels.
Vibration Control
- To activate or deactivate device vibration, slide the VOLUME switch to the
+ position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is
activated or deactivated.
- When vibration is turned off, the headset will not vibrate when receiving an
incoming call or when it is out of range.
- Vibration will automatically be activated when the device is powered on.
aptX
- The HBS-760 features aptX technology that ensures audio content transmitted
via Bluetooth is seamless and crystal-clear.
- aptX is automatically enabled as long as the source device supports it.
Equalizer
- While playing music, press the PLAY/PAUSE/STOP button twice to switch
between Bass Boost (default), Normal, and Treble Boost.
- The size of the ear gel can affect the amount of bass you hear.
Audio Streaming
Play
- Briey press the PLAY/PAUSE/STOP button.
Pause
- While playing music, briey press the PLAY/PAUSE/STOP button.
Stop
- While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second.
Next song
- Briey slide the FF/REW switch to the FF position.
Previous song
- Briey slide the FF/REW switch to the REW position.
Fast Forward
- Slide and hold the FF/REW switch to the FF position.
Rewind
- Slide and hold the FF/REW switch to the REW position.
Voice Dialing
- Briey press the CALL button to activate Voice Command. For best results,
record the voice dialing tag through your headset.
NOTE: If your handset does not support voice dialing, this action may activate Last
Number Redial.
Last Number Redial
- Press and hold the CALL button for 1 second to activate Last Number Redial.
The headset will beep and then call the last number dialed.
Ending a Call
- Briey press the CALL button.
Call Waiting
- Answer a second call without hanging up the rst call by pressing the CALL button
for 1 second. Press the CALL button for 1 second to return to the original call.
- Briey press the CALL button to terminate both calls at once.
Rejecting a Call
- Activate call reject by pressing the CALL button for 2 seconds when the handset
rings.
* These functions may only be used if your handset supports them. For further
information about using these features, please consult your handset’s user
manual.
Mic Mute
- Slide the VOLUME switch to the + position and the FF/REW switch to the REW
position at the same time for 1 second to mute/unmute the Mic during conversation.
* Caution: For your safety, do not use this function while driving.
ENG
Loading ...
Loading ...
Loading ...