Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
8
Cleaning the metal mesh grease filters
These instructions apply to several appliance variants. It
is possible that individual features are described which
do not apply to your appliance.
:Warning – Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
■ Do not use any aggressive, acidic or alkaline
cleaning agents.
■ When cleaning the metal mesh grease filters, also
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
■ The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent for
stubborn dirt. It can be ordered via the Online Shop.
■ Soak the metal mesh grease filters in a hot soapy
solution.
■ Clean the filters with a brush and then rinse them
thoroughly.
■ Leave the metal mesh grease filters to drain.
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
■ Do not clean heavily soiled metal mesh grease filters
together with utensils.
■ Place the metal mesh grease filters loosely in the
dishwasher. The metal mesh grease filters must not
be wedged in.
Removing metal grease filter
1. Pulling out the filter drawer
2. Push the lock and push the metal grease filter
backwards and pull downwards.
While doing this, place your other hand under the
metal grease filter.
Note: To avoid causing damage, do not bend the
metal grease filters.
3. Take the metal grease filter out of the holder.
Note: Grease may accumulate in the bottom of the
metal grease filter. Hold the metal grease filter level
to prevent grease from dripping out.
4. After removing the metal grease filters, clean the
inside of the appliance.
5. Clean the metal grease filters and let them dry
before re-fitting them.
Installing the metal mesh grease filter
1. Insert the metal mesh grease filter.
While doing this, place the other hand under the
metal mesh grease filter.
2. Fold the metal mesh grease filter upwards, locking it
in place.
Changing the activated charcoal filter (only
in circulating-air mode)
In order to guarantee efficient odour filtration, the filter
must be serviced regularly.
The activated charcoal filters must be replaced at least
every 4 months.
Notes
■ The activated charcoal filters are not included in the
delivery. The activated charcoal filters can be
obtained from specialist retailers, from our after-
sales service or from the Online Shop.
■ The activated charcoal filters cannot be cleaned or
reactivated.
1. Remove the metal grease filters.
2. Turn the old activated charcoal filter and pull away
from the holder. ¨
3. Push the new activated charcoal filter onto the
holder and turn. ©
4. Fit the metal grease filters.
%$
Loading ...
Loading ...
Loading ...