Loading ...
Loading ...
3
How It Works
The following describes what to expect when using a washer with load-sensing technology.
After starting your washer, there will be a
short pause before the washer begins to
ll. The washer makes different sounds
and pauses briey throughout each cycle.
This is normal.
Next, three nozzles spray to evenly
saturate the load. Then a sensing step
occurs. The lling stops, and the agitator
moves the load for a very brief time.
The washer estimates how much more
water to add; then, lling resumes and
continues to sense until the right amount
of water is reached. Now washing begins.
WHAT’S NEW ABOUT YOUR LOAD-SENSING WASHER
Dry Load
Correct Water Level for Load
Load Filling/Sensing
Load-Sensing determines the appropriate amount of water for each load based on your cycle and options selected for maximum
energy and water savings.
Although your new load-sensing washer may look the same as other washers, there are a few important steps that are required to
maximize your water and energy savings:
BEFORE STARTING THE WASHER:
Presort all of your laundry.
Add all of your garments and laundry products to the washer
and washer dispensers. See “Starting Your Washer”.
Do not interrupt the cycle or open the lid after starting
the washer. Opening the lid will reduce or eliminate water
savings. If the lid is opened during ll, the washer will add
more water to accommodate any additional load. If the
lid is opened after the washer has completed lling, the
washer will then ll to the highest level.
Water may not cover the top of the clothes and water level will
vary with size of load. This is normal for Auto Load-Sensing
washers. For these models, the water ll is optimized by the
system for best wash performance.
IMPORTANT: To save water and energy, DO NOT OPEN THE LID
after starting the washer.
Loading ...
Loading ...
Loading ...