User Manual - Page 9

For MGD4200BG. Also, The document are for others Maytag models: MED3000BG, MED3000BW, MED4000BW, MED4200BG, MED4200BW, MGD3000BG, MGD3000BW, MGD4000BW, MGD4200BG, MGD4200BW, YMED3000BG, YMED3000BW, YMED4000BW, YMED4200BG, YMED4200BW

Loading ...
Loading ...
Loading ...
9
CYCLE GUIDE — TIMED CYCLES
Any load Timed Dry High (the last Wrinkle Prevent Use to dry items to a damp level for items that do
NOTE: Select Air Medium timed dry not require an entire drying cycle. Select a drying
Only to dry foam, Low time set) temperature based on the type of fabrics in your
rubber, plastic, or Extra Low load. If you are unsure of the temperature to select
heat-sensitive Air Only for a load, select the lower setting rather than the
fabrics. higher setting.
Small loads and Rapid Dry High 18 Wrinkle Prevent For small loads of 3–4 items.
sportswear Medium
Low
Extra Low
Air Only
Small loads and Air Dry 18 For small loads of 3–4 items.
sportswear
Items to dry:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Settings and options shown in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
CYCLE GUIDE — STEAM CYCLE (on some models)
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more than
1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Shirts, blouses, Refresh High 15 Wrinkle Prevent Use to reduce light wrinkles from loads left in the
and slacks dryer too long. Do not add dryer sheets.
Items
to refresh:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Adjusting drying time on Timed Cycles
When you select a Timed
Cycle, the default time appears
in the display. Use + and to
increase or decrease the time
in 1-minute increments. Touch
and hold to change the time
in 5-minute increments.
The maximum dry time is 100 minutes.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such
as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various
loads, refer to the care label directions.
Loading ...
Loading ...
Loading ...