Loading ...
Loading ...
Loading ...
10
Installation instructions
4. Installation
Your Fisher & Paykel refrigerator is fitted with front
and rear rollers, designed for moving the product
in the forwards and backwards direction.
Avoid moving the product in a sideways direction
as this may damage the rollers or the floor
covering/surface.
A
Your refrigerator will arrive with the front feet
wound up making moving the product into its
final location a simple task.
B
Roll the refrigerator into its final position making sure there is the correct air gap between the
product and surrounding cabinetry. See minimum clearance in cabinetry dimensions table (refer
to page 9).
C
Adjust the front feet down until the refrigerator is leaning backward with the front
approximately 10 mm higher than the back. This will ensure a good door closing action.
(Refer to Fig.1).
D
Aligning your refrigerator with cabinetry.
Align the sides of the refrigerator with the cabinetry by adjusting the hinge side front foot.
Adjust the handle side foot until it touches the floor and takes a small amount of weight.
Once the refrigerator is in place and aligned with cupboards/alcove gently push on the front top
and check if the product is rocking or stable.
Lower the front
of the refrigerator
Fig.1 Refrigerator feet
Raise the front of
the refrigerator
Loading ...
Loading ...
Loading ...