Loading ...
Loading ...
Loading ...
19
NOTE
If you choose to restore factory default settings, all
of the above user preferences will be restored to
their original settings (factory default). The oven
temperature offset will reset, and any stored recipes
will be cleared.
NOTE
The oven temperature adjustments made with this
feature will not change the self clean cycle temperature
or the broil temperature.
The oven temperature adjustments are permanent and
will stay in the unit memory unless you manually change
it again or if all the controls are reset. Even a power
outage will not reset these changes. Follow the same
procedure again if you wish to change it to a different
setting or use the Restoring Factory Default Setting
instructions on this page to restore settings to their
defaults.
SETTING OVEN CONTROLS
To restore oven control to factory default settings:
1. When the oven is in idle and no cooking function
is in operation, press and hold the 7 pad until the
acceptance tone sounds (about 6 seconds).
2. Press Start pad. The control is now reset to default
settings.
RESTORING FACTORY DEFAULT SETTING
Your appliance is programmed with default control
settings. Over time, users may make changes to these
settings. The following options have settings that can
be modied and may have been changed since the
appliance was new:
• 12 or 24 hour display mode.
• Continuous bake or 12 hour energy savings mode
• Silent or audible control
• Oven temperature display (°F or °C)
• Oven temperature adjustments (offsets)
• Cancel/continue cooking with meat probe option.
ADJUSTING OVEN TEMPERATURE
The temperature in the oven is pre-set at the factory.
When rst using the oven, be sure to follow recipe times
and temperatures. If you think the oven is cooking too
hot or too cool for the temperature you select, you can
adjust the actual oven temperature to be more or less
than what is displayed. Before adjusting, test a recipe
by using a temperature setting higher or lower than the
recommended temperature. The baking results should
help you to decide how much of an adjustment is
needed.
To adjust the oven temperature higher:
1. Press Bake for 6 seconds. UPO 0 will appear in the
display.
2. To increase the temperature, use the number pads
to enter the desired change. For example, for 30°F,
press 3 0. The temperature may be increased as
much as 35°F (19°C).
3. Press Start to accept the temperature change and
the display will return to the time of day. Press Off to
reject the change if necessary.
To adjust the oven temperature lower:
1. Press Bake for 6 seconds. UPO 0 will appear in the
display.
2. To increase the temperature, use the number pads
to enter the desired change. For example, for -30°F,
press 3 0. Then press Self Clean. The temperature
may be decreased as much as 35°F (19°C).
3. Press Start to accept the temperature change and
the display will return to the time of day. Press Off to
reject the change if necessary.
Loading ...
Loading ...
Loading ...