User Manual - Page 32

For CHRYSLER 2014 200.

Loading ...
Loading ...
Loading ...
To Enter Remote Start Mode
Press and release the REMOTE START button
on the RKE transmitter twice within five sec-
onds. The vehicle doors will lock, the parking
lights will flash and the horn will chirp twice (if
programmed). Then, the engine will start and the vehicle
will remain in the Remote Start mode for a 15-minute
cycle.
NOTE:
If an engine fault is present the vehicle will start and
then shut down 10 seconds later.
For security, power window operation is disabled
when the vehicle is in the Remote Start mode.
The engine can be started two consecutive times (two
15 minute cycles) with the RKE transmitter. However,
the ignition switch must be cycled to the ON/RUN
position before you can repeat the start sequence for a
third cycle.
Remote start will also cancel if any of the following occur:
The engine stalls or RPM exceeds 2500
Any engine warning lamps come on
Low Fuel Light turns on
The hood is opened
The hazard switch is pressed
The transmission is moved out of PARK
The brake pedal is pressed
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Loading ...
Loading ...
Loading ...