Loading ...
Loading ...
Loading ...
PERIMETER ALARM SYSTEM
The perimeter anti-theft system will warn you in the event of an
unauthorized entry to your vehicle.
If there is any potential perimeter anti-theft problem with your vehicle,
ensure ALL remote entry transmitters are taken to the dealership to
aid in troubleshooting.
Arming the system
When armed, this system will respond if unauthorized entry is
attempted. When unauthorized entry occurs, the system will flash the
turn signal lamps and will sound the horn.
The system is ready to arm whenever key is removed from the ignition.
Any of the following actions will prearm the alarm system:
• Press the
control on the remote entry transmitter.
• Press the driver or passenger interior power door lock control while
that respective door is open, then close the door.
• Lock the vehicle with the key in the driver’s door key cylinder.
• Lock the vehicle by pressing the 7 • 8 and the 9 • 0 on the keypad at
the same time (with the driver’s door closed).
Theft indicator
When the vehicle is locked using one of the listed methods, the theft
indicator located on the instrument panel will flash briefly every 2
seconds to indicate that the perimeter alarm system is armed.
Disarming the system
You can disarm the system by any of the following actions:
• Unlock the doors by pressing the
control on your remote entry
transmitter.
• Unlock the doors with a key. Turn the key full travel (toward the front
of the vehicle) to ensure the alarm disarms.
• Unlock the doors by entering the factory-set code or any of the three
custom codes into the keyless entry keypad.
•
Turn the ignition to the 4 (RUN) position with a SecuriLock娂 coded key.
Triggering the anti-theft system
The armed system will be triggered if any door, the trunk or the hood is
opened without using the key, the remote entry transmitter or valid
keypad code.
2004 Lincoln LS (dew)
Owners Guide (post-2002-fmt)
USA English (fus)
Locks and Security
142
Loading ...
Loading ...
Loading ...