Loading ...
Loading ...
Loading ...
This feature allows an iPod威 to be plugged into the
vehicle’s sound system through a 16–pin connector, using
the provided interface cable.
iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威
and iPhone威 devices. Some iPod威 software versions may
not fully support the iPod威 control features. Please visit
Apple’s website for software updates.
NOTE:
•
If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
•
Connecting an iPod威 to the AUX port located in the
radio faceplate, plays media, but does not use the
iPod威 control feature to control the connected device.
Connecting The iPod姞
Use the provided connection cable to connect an iPod威 to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod威 is connected and synchronized to the vehicle’s
iPod威 control system (iPod威 may take a few seconds to
connect), the iPod威 starts charging and is ready for use
by pressing radio switches, as described below.
NOTE:
•
It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
•
If the iPod威 battery is completely discharged, it may
not communicate with the iPod威 control system until
a minimum charge is attained. Leaving the iPod威
connected to the iPod威 control system may charge it to
the required level.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 275
Loading ...
Loading ...
Loading ...