User Manual CHiQ L32H5 - 32 Inch Smart HD LED TV

• User Manual - (English)
• User Manual - (English)

• Product sheet - (English)

Table of contents

• Main Unit Controls
• Basic Operation
• Maintenance
• Troubleshooting

USER MANUAL TELEVISION

Main Unit Controls

Front Panel

POWER/MENU Button :

- Long Press for power off.

- Short Press for power on / quick menu.

- short press to select options ,or switch the items. Long press to comfirm and enter into the items.

Press the button to open the quick operation menu:

: Turn off the TV.

P+/P- : Changes the channels.

: Adjust the volume level.

: Switch the input source items.

Back view controls and sockets

Basic Operation

Turning on and off the TV

■ Turn on the TV

Plug the power cord into a suitable power point, then press the POWER ( ) button, on the lower side of the back panel (or on the remote control, making sure to aim it at the sensor at the front of the TV);

■ Turn off the TV

Press the button on the remote control to enter standby mode. To power down the TV completely, unplugs the power cord from the mains socket.

Do not leave your set in standby mode for long periods of time. If you will not use the TV for a long time, it is recommended to unplug the set from the mains and aerial.

First Time Setup

If this is the first time you run the TV, the Initial Setup Menu will appear in the picture, and the items of this menu also exist in other menus, so you are able to change the values after you set them up.

Tips: Make sure that the antenna or cable TV system connection is made.

■ Set you desired language

Press the ▲/▼ buttons to select the Menu Language, and then press the OK button. Press the ► button to go to the next step.

■ End-User License Agreement

Select Accept and then press the ► button to accept the EULA and go to the next step.

Select View addtional details and then press the OK button to read a detailed EULA.

Press the ◄ button to go to previous step.

■ Select your country

Press the buttons to select the country you are living in, and then press the OK button.

Press the ► button to go to the next step. Press the ◄ button to go to previous step.

■ Select your time zone

Press the buttons to select a time zone, and then press the OK button.

Press the ► button to go to the next step. Press the ◄ button to go to previous step.

■ Select your TV environment

Press the ▲/▼ buttons to select the Home Mode or Store Mode and then press the OK button.

• Home is the recommended setting to produce the best energy efficiency. If you want to set Store Mode, a message appears asking you to confirm your choice.

Press the ► button to go to the next step. Press the ◄ button to go to previous step.

■ Network connection (Wired or WIFI)

Press the ▲/▼ buttons to select “Wired” or “Wifi”, and wired or wireless network is enabled respectively. (For more details on connection, please refer to the “Network settings”.)

Select “Skip” and press OK to cancel the network setup and move to next step.

■ Select the antenna type

Press the buttons to select the tuning modes and then press the OK button. (For more detailed information, please refer to Channel menu → Auto Tuning).

Press the ► button to go to the next step. Press the ◄ button to go to previous step.

■ The TV starts Auto Tuning.

NOTE:

• If the TV doesn't receive any channels, please check your aerial connection or the country you selected, and then try an auto search again.
• If the TV just receives some of the channels, it means the aerial's reception isn't good enough and an antenna service is recommended.

Programme Selection

■ Using the ∧/∨ on the panel of TV or on the remote control.

Press P ∧ to increase channel number.

Press P ∨ to decrease channel number.

■ Using 0- 9 Digital Buttons.

You can select the channel number by pressing 0 to 9. Example:

To select - channel (e.g. Channel 5): Press 5.

To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.

Volume Adjustment

■ Press the +/- on the panel of TV or + - on the remote control to adjust the volume.

■ If you want to switch the sound OFF, press the .

■ You can release mute by pressing the or increase the volume.

Changing the Input Source

1. You can select the input source by pressing the SOURCE ( ) button on the remote control.
2. Press the arrow button to cycle through the input source, and press the OK button to confirm your choice.

Maintenance

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the screen

1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

Troubleshooting

Before contact the service technician, perform the following simple checks. If any program still persists, unplug the TV and calling for serving