Loading ...
Loading ...
Loading ...
GB
20
Put the protection lid (2) back in place by
extending it slightly, taking care to match
up the identical shapes in the hinge axis
and the hole in the lid (9).
* Depending on the model:
• Remove the appliance from the two
supports (*13) and fold up the storage
shelf (*12) as shown in the drawings
-> -> -> .
• Place the storage shelf (*12) upside down
on top of the appliance (opposite of ).
Close the protection lid (2): take hold of the
handle, lift the protection lid (2) and then
pull towards you.
Lock the protection lid in place (2) by
closing the two clips (1) (opposite of ).
The appliance may be stored vertically.
Environment protection
first !
Your appliance contains
valuable materials
which can be recovered
or recycled.
Leave it at a local civic
waste collection point.
For U.K. users only :
If you have any problems or queries, please
contact our Customer Relations team on :
HELPLINE 0845 602 1454 – UK,
(01) 4751947 – Ireland, www.tefal.co.uk
This product has been designed for
domestic use only. Any commercial use,
inappropriate use or failure to comply with
the instructions, the manufacturer accepts
no responsibility and the guarantee will not
apply.
J
A/1
F
C
E/1E/2E/3E/4
G
Unplug the appliance and let it cool down
before removing the grill plate or the grid
(4) (depending on the model), the heating
element (5) and the reflector (7).
Never close over the protection lid (2) if
the appliance is still hot.
The grill plate or
the grid (4) (depending on
the model), the reflector (7), the base of the
appliance (8) and the protection lid (2) can
be cleaned with a sponge, hot water and
washing up liquid.
To remove the grill plate or
the grid
(4)
(depending on the model), unlock it from
the appliance using the handles (3).
To remove the protection lid (2):
•
Take hold of the handle, lift the protection
lid (2) and then incline it towards you.
•
When the identical shapes in the hinge
axis and the hole in the lid (9) are
opposite one another, the lid may be
removed by slightly extending the lid
towards the outside.
Do not use a metal scourer or scouring
powder.
To clean the grill plate or the grid (4)
(depending on the model), the sponge can
be replaced by a brush.
The heating element (5) does not need
cleaning.
If it is really dirty, rub with a dry cloth when
cold.
Do not immerse the appliance in water.
Do not immerse the appliance, the
control panel or power cord in water.
Storage
Place the heating element (5) on the
reflector (7) then insert the control panel (6)
properly in its place.
Put the power supply cord (10) in the
compartment provided for this purpose
behind the control panel (6), and then store
it in the reflector (7).
Place the grill plate or
the grid (4)
(depending on the model) on the appliance
and lock it in place using the two
handles (3).
D
H
D
D
G
F
D
D
D
D
Grill'n Pack 03-08 5/03/08 15:05 Page 20
Loading ...
Loading ...
Loading ...