Loading ...
Loading ...
Loading ...
- 11 -
The Energy Saving feature saves energy by turning
off the display by pressing the Energy Saving button.
The display will automatically turn off after 5 minutes
of idleness if the clock has not been set.
If the clock has been set, then the display will not
automatically turn off.
USING YOUR MICROWAVE OVEN
1.
Touch Energy Saving to
turn the display off.
2. Touch Energy Saving to
turn the display on.
LIGHT HI/LOW/OFF
This button on the controller controls the cooktop
light.
To turn on, touch once.
"Light" will flash in display,
then stay on.
To turn off, touch button
again. "Light" will disappear
from the display.
VENT ON/OFF
The vent removes steam and other vapors from
the surface cooking area.
Touch once. "FAN SLOW"
will scroll in the display.
Fan will work on slow speed.
Fan will turn off. "FAN OFF"
will scroll in display.
Example: To set the Lamp for ON
1.
Touch Light Hi/Low/Off.
2.
Touch Light Hi/Low/Off.
1. Touch Vent On/Off.
VENT 4 SPEED
When the fan is on, touch this
button to toggle the fan speed.
Fan speed will change in
sequence from slow, low, high,
turbo and back to slow.
ADD 30 SEC
A time-saving button, this simplified control lets you
quickly set and start microwave cooking without the
need to touch START/Enter.
Example: To set ADD 30 SEC for 2 minutes.
Touch Add 30 Sec. 4 times.
The oven begins cooking
and the display shows time
counting down.
NOTE: If you continue to touch Add 30 Sec., it will
add 30 seconds up to 99 min 59 seconds.
2.
Touch Vent On/Off.
TURNTABLE ON/OFF
For best cooking results, leave the turntable on.
It can be turned off for large dishes. Touch
Turntable On/Off button to turn the turntable on or
off.
NOTES:
1. This option is not available in sensor cook, defrost,
kids meal and soften/melt modes.
2. Sometimes the turntable can become hot to touch.
Be careful when touching the turntable during and
after cooking.
3. Do not run the oven when empty.
NOTE: Turn the microwave’s vent fan on whenever
you use the oven range cooktop below it.The fan
captures smoke, steam, and odors and also prevents
the heat from the cooktop from damaging microwave
components.
If the microwave is cooking, the vent fan turns on
automatically if the sensors detect too much heat
from the cooktop. This is normal, and is designed
to prevent microwave component damage.
Loading ...
Loading ...
Loading ...