Loading ...
Loading ...
Loading ...
22 / EN
Dryer / User Manual
Adding and removing laundry in
stand-by mode
If you want to add or remove laundry after
the drying program starts:
1. Press the Start/Pause button to take
the dryer into Stand-by mode. Drying
operation stops.
2. Open the loading door, add or remove
laundry and close the loading door.
3. Start the program by pressing the Start /
Pause button.
C
The laundry adding made after
the drying operation started may
cause the dried laundry inside the
dryer to mix with the wet laundry
and the laundry to remain damp
after the operation ends..
C
Laundry adding and removing
can be repeated as much as
desired during drying operation.
But this process would
continuously interrupt the
drying operation, and so would
cause the program duration
to lengthen and increase
energy consumption. Thus, it is
recommended to add laundry
before the program starts.
C
If a new program is selected
by changing the position of the
program selection knob while
your dryer is in stand-by mode,
the running program ends.
Do not contact the inner surface
of the drum when adding or
removing laundry during a
continuing program. The drum
surface is hot.
5.11 Starting the program
Start the program by pressing the Start /
Pause button.
Start/Pause led and the Drying led light up,
indicating the program started. The “:” sign
in the middle of the remaining duration starts
to blink.
5.12 Child Lock
The dryer features a child lock which
prevents the dryer program flow from being
affected when buttons are pressed during
operation.
When the Child Lock is active, all buttons
except for the On/Off button are deactivated.
To activate the child lock, press the Sound
Notification button and End Duration button
simultaneously for 3 seconds.
The child lock should be deactivated to be
able to start a new program after the current
program ends or to be able to interfere with
the current program. Keep the same buttons
pressed for 3 seconds again to deactivate
the child lock.
C
The lock led on the screen
lights up when the Child Lock is
activated.
C
Child Lock deactivates when the
dryer is turned off and on again
using the On/Off button.
A warning sound is heard when any button
is pressed (except for On/Off button) or the
Program Selection knob is turned while the
child lock is active.
5.13 Changing the program
after it is started
After the dryer starts running, you can
change the program you selected to dry your
laundry with a different program.
1. For example, to select Extra Dry
program instead of the Iron Dryness,
stop the program by pressing the Start /
Pause button.
2. Turn the Program Selection knob to
select the Extra Dry program.
3. Start the program by pressing the Start /
Pause button.
Loading ...
Loading ...
Loading ...