Loading ...
Loading ...
Loading ...
3
• This unit is not designed to operate in enclosed spaces. When placing
your unit, make sure you allow at least 4” of clearance on all sides.
• Use two or more people to move and install the appliance. Failure to do so
can result in back or other injury. When moving the appliance, do not tilt it
beyond 45° from the upright position.
• To ensure proper ventilation for your refrigerator-freezer, the front of the unit
must be completely unobstructed. Choose a well-ventilated area with
temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be
installed in an area protected from the elements such as wind, rain, water
spray or drips.
• The appliance should not be located next to ovens, grills or other sources of
high heat.
• The appliance must be installed with an electrical connection in accordance
with state and local codes. A standard electrical supply (115-120V AC only,
60 Hz), properly grounded in accordance with the National Electrical Code
and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the appliance.
• The fuse (or circuit breaker) size should be 15 amps.
• It is important for the refrigerator-freezer to be leveled in order to work
properly. You may need to make several adjustments to level it.
• Do not use solvent-based cleaning agents or abrasives on the interior
surfaces. These cleaners may damage or discolor the interior.
• This appliance is not intended for use by young children or infirm persons
without supervision.
• Do not use this apparatus for other than its intended purpose.
CAUTION
: THIS APPLIANCE IS NOT DESIGNED FOR THE STORAGE OF
MEDICINE OR OTHER MEDICAL PRODUCTS.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...