Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem Possible cause Solution
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable.
The compressor operates
continually.
Temperature is set incorrect-
ly.
Refer to "Operation"/"Control
panel" chapter.
Many food products were put
in at the same time.
Wait a few hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
Water flows inside the refrig-
erator.
The water outlet is clogged. Clean the water outlet.
Food products prevent water
from flowing into the water
collector.
Make sure that food products do
not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water outlet to
the evaporative tray.
The temperature in the appli-
ance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower temperature.
The food products tempera-
ture is too high.
Let the food products tempera-
ture decrease to room tempera-
ture before storage.
Many food products were
stored at the same time.
Store less food products at the
same time.
There is too much condensed
water on the rear wall of the
refrigerator.
Door was opened too fre-
quently.
Open the door only when neces-
sary.
Door was not closed com-
pletely.
Make sure the door is closed
completely.
Stored food was not wrap-
ped.
Wrap food in suitable packaging
before storing it in the appliance.
Door does not open easily. You attempted to re-open the
door immediately after clos-
ing.
Wait a few seconds between
closing and re-opening of the
door.
6
Loading ...
Loading ...
Loading ...