Loading ...
Loading ...
Loading ...
11
Lowes.com/harborbreeze
WIRING
Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
GREEN and WHITE wire connections on the
opposite side of the outlet box from the BLACK and
BLUE wire connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
2.
CC
E3 Wire Connector x 4
Hardware Used
CC
CC
2
CC
FINAL INSTALLATION
1.
Locate two canopy mounting screws (O) on
underside of mounting bracket (C) and remove
canopy mounting screw (O) closest to the open end
of the mounting bracket (C). Partially loosen the
other canopy mounting screw (O).
Then, lift canopy (B) to mounting bracket (C). Place
rounded part of slotted hole in canopy (B) over
loosened canopy mounting screw (O) and push up.
Twist canopy (B) to lock. Re-insert canopy
mounting screw (O) that was removed, then tighten
both canopy mounting screws (O) securely. Finally,
slide canopy cover (E) up to canopy (B), aligning
rounded part of slotted holes in canopy cover (E)
with screw heads in bottom of canopy (B). Turn
canopy cover (E) clockwise until it stops.
1
B
O
A
C
O
B
O
O
E
Loading ...
Loading ...
Loading ...