Loading ...
Loading ...
Loading ...
7
Mainnce & Care
Cleaning the dirt cup filter
Use only BISSELL replacement filters in
your vacuum.
1. Unplug the vacuum from the electrical outlet.
2. The dirt cup filters can be reached by
removing the dirt cup from the vacuum, and
unclipping the dirt cup lid then pivoting
backwards. Pull filter upwards to remove.
3. The dirt cup filter can be can be hand washed
in cold water with a mild detergent. Rinse well
and air dry thoroughly before placing back onto
the filter frame base.
4. Close dirt cup lid and replace dirt container
back onto product.
Replacing the post-motor filter
The post-motor filter assists in the filtration
process to return cleaner air to the room. Use
only BISSELL replacement filters.
1. Unplug the vacuum from electrical outlet.
2. Remove the filter door (located in the wheel
next to the on/ off switch of the vacuum) by
twisting it anti-clockwise and pulling out and
away from the vacuum
3. The post-motor filter can be hand washed in
cold water with a mild detergent. Rinse well and
air dry thoroughly before placing back into the
vacuum.
4. Replace the filter door by aligning the tabs up
with the slots on inside the wheel and turning
clockwise until you feel a click.
Cleaning the cyclone shroud
1. Remove the dirt cup from the dirt cup
lid and cyclone assembly by twisting it
anti-clockwise and pulling away.
2. Remove the cyclone shroud by twisting it
clockwise then pulling down and away from
the dirt tank lid, over the secondary cyclone
fine dirt collector.
3. The cyclone shroud can be washed in cold
water with a mild detergent. Make sure it is
completely dry before replacing.
4. Replace the cyclone shroud by sliding it
over the bottom of the secondary cyclone dirt
collector and lining it up with the lock/ unlock
arrow before twisting anti-clockwise until you
feel a click.
5. Replace the dirt cup and twist clockwise
to lock.
www.BISSELL.com
2.
3.
1. 2.
3. 4.
Loading ...
Loading ...
Loading ...