Loading ...
Loading ...
Loading ...
4
BEFORE USING FOR THE FIRST TIME
Fill to max, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust,
etc.
FILLING
1. Remove the lid.
2. Fill with at least 1 cup of water, but not above max.
3. If you want only 1, 2, or 3 cups of water, ll to the 1, 2, or 3 marks inside the kettle.
4. Ret the lid. Always t the lid when boiling the kettle.
USING YOUR KETTLE
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I.
5. The light will come on and the kettle will start to heat.
6. When the water boils the kettle will switch o.
7. To switch o manually, move the switch to O, or simply lift the kettle o the stand.
GENERAL
Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused
by the steam used to switch your kettle o automatically.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it o. If this happens,
unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle
to boil dry will shorten the life of the element.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Remove the lid.
4. Slide the lter up and out of the guides.
5. Rinse the lter under a running tap while brushing with a soft brush.
6. Slide the lter down, into the guides.
7. Ret the lid.
Descale regularly, (at least monthly).
Descale the appliance with a proprietary descaler. Follow the instructions on the package of
descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
Loading ...
Loading ...
Loading ...