Loading ...
Loading ...
Loading ...
19
English
Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1 Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the set-top box or the
connected device and wait a few seconds till the picture appears.
• Pressing ▲ reverses the direction of the Input modes.
2 Use the remote control of the set-top box or the connected device
to select channels.
Sleep timer
Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until Off is displayed.
Switching audio mode
1
Press SAP to display the currently selected language
and the number of available languages.
2 Press SAP repeatedly to cycle through the available
audio languages.
1 Press SAP to display the currently selected audio mode.
2 While receiving an MTS broadcast, press repeatedly
to cycle through the available audio channels.
e.g.) When all audio are available
Source
TV
HDMI1
HDMI2
HDMI3
Video
PC
e.g.)
DTV / Analog TV
channel
or
11.1
HDMI1
HDMI2
PC
Video
Component
HDMI3
Sleep 120min.
Note
• Available languages differ depending on the broadcast.
• Other is displayed when the audio language cannot be acquired or the acquired
languages are other than English, French or Spanish.
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
Digital TV operation
11.1
English 1/3
Analog/Cable TV operation
11
SAP / STEREO
SAP/STEREO
SAP/MONO
SAP/STEREO
Loading ...
Loading ...
Loading ...