Loading ...
Loading ...
Loading ...
5
• Check the lid is fully closed or the kettle may not switch off when it boils.
SWITCHING ON
Caution: Keep clear, as steam will escape from the spout when boiling.
• Plug the power cord into the wall power outlet and switch it on.
• Place the kettle on the base – take care not to spill any water.
• Press the ON/OFF switch down, the light in the switch will illuminate.
• The kettle will heat up.
SWITCHING OFF
• When the water boils, the kettle will switch itself off and the light in the switch will go out.
• To switch off manually, either lift the ON/OFF switch or, lifting the kettle from the base will
cause the ON/OFF switch to pop up automatically.
GENERAL
• Remove the kettle from the base before pouring.
• To avoid the risk of splashing, pour slowly and do not over-tilt the kettle.
• Do not tilt the kettle backwards as water may seep into the control area.
• If this happens, empty any remaining water and allow the kettle to dry before further use –
place it in a warm, dry location for at least 12 hours.
• When you lift the kettle, you may see a little moisture on the base. This is the steam used
to switch the kettle off automatically, which then condenses and escapes via vents under
the kettle. This is normal.
• Always switch off and disconnect the appliance from the wall power outlet when not in use.
USING WITH INSUFFICIENT WATER
• Using the kettle with insufcient water can shorten the life of the element.
• If the kettle is accidently switched on when it does not contain sufcient water, a boil-dry
cut-out will switch the kettle off.
• Sit the kettle on a stable heat resistant surface until it has fully cooled down.
• Do not ll the kettle with water until it is cold, or it may spit.
CARE AND MAINTENANCE
• Check that the kettle is switched off by lifting the kettle from the base and replacing it.
• Switch the power off and remove the plug from the wall power outlet.
• Allow the kettle to cool down fully.
• Wipe over the outside of the kettle and base with a damp cloth. A mild dishwashing
detergent may be used if required.
• Keep all connectors and sockets dry.
• Do not immerse the kettle or base in liquid.
• Do not use alkaline cleaning agents or harsh abrasives when cleaning this appliance.
• Clean the inside of the kettle using the instructions in the “DE-SCALE REGULARLY”
section.
Loading ...
Loading ...
Loading ...