Loading ...
Loading ...
Loading ...
9
1 • Assembling the elements of the
appliance
P
ush the flexible hose into the vacuum inlet (Fig.1) and
turn until it locks. To remove it, turn in the opposite
d
irection and pull.
• Push the metal telescopic tube into the end of the power
n
ozzle until you hear a locking ‘click’ (Fig.2) (to release it,
push the locking button on the tube and remove it).
•Push the all floor type nozzle (23) into the end of the metal
t
elescopic tube until you hear a locking ‘click’ (Fig.3) (to
release it, push the locking button on the nozzle and
remove it).
• Adjust the telescopic metal tube to the required length
using the telescopic system (TELESCOPIC SYSTEM) (Fig.4)
Fit the appropriate accessory to the end of the metal
telescopic tube or the power nozzle:
- For rugs and carpets: use the all floor type nozzle in the
retracted brush nozzle position or the Turbobrush* (fibres
and animal hairs).:
- For smooth surfaces and smooth surfaces with crevices
(such as tiled floors): use the all-surface nozzle (23) with
the brush extended or, for better results, use the smooth
surface nozzle* (28.a*) without the removable brush.
- For fragile surfaces, such as parquet, it is recommended
to use the standard parquet nozzle (26*) or the nozzle with
a line of bristles (28.b*)
- For corners and hard to reach spots: use the telescopic
crevice tool*.
- For furniture and fragile surfaces: use the brush built into
the power nozzle (EASY BRUSH) or the upholstery nozzle*.
2 • Plugging in the power cord and
switching on the appliance
Unwind the power cord completely, plug in your vacuum
cleaner and press on the On/Off button (Fig.7).
Remark: you can use your vacuum cleaner in the
horizontal position (sleigh position) but also in the vertical
position, notably when you are vacuuming the stairs or
removing dust from the curtains.
Adjust the suction power:
using the electronic power control (Fig.8)
with the manual power nozzle switch (Fig. 9)
• Position (MIN) for vacuuming delicate fabrics (net
curtains, textiles)
• Position (Medium) for everyday vacuuming for all
types of floors, which are only slightly
dirty
• Position (MAX) for vacuuming hard floors and
very dirty rugs and carpets.
3 • Storing and carrying your
vacuum cleaner
After use, switch off your vacuum cleaner by pressing the
On/Off switch and unplug it (Fig.10). Rewind the power
cord by pressing the power cord rewind button (Fig.11). In
the vertical position place the nozzle in the parking
position (Fig.12).
This allows you to carry and store your vacuum cleaner
when it is in the parking position (Fig.13).
USING THE APPLIANCE
IMPORTANT Never operate your vacuum cleaner
without its bag and without its filtration system
(cassette).
IMPORTANT Always switch off and unplug your
vacuum cleaner before changing the accessories.
COMFORT TIPS
E
RGO COMFORT SILENCE Chain
C
omfortable to use, the ERGO COMFORT SILENCE
range has been designed to make using your
v
acuum cleaner an easier and more enjoyable
experience.
S
o that you can keep an upright position and avoid
bending your back, make sure you:
1
. Adjust the length of the metal telescopic tube
ERGO COMFORT SILENCE to suit your body build
(Fig.5).
2. Place your second hand in front of the power
nozzle handle ERGO COMFORT SILENCE (Fig.6).
* Depending on models: either equipment specific to cer-
tain models or available as an optional accessory.
EN
IMPORTANT: The nozzle for smooth surface with
crevices 28.a* is used to measure performance
associated to the energy label. This nozzle allows
you to optimise the dust-collection performance of
your appliance on smooth surfaces with crevices.
736299-01_TW58-59_SILENCE-FORCE-EXTREME_736299/01 12/01/15 09:22 Page9
Loading ...
Loading ...
Loading ...