Loading ...
Loading ...
Loading ...
ENG
ENGLISH
14
Using the Sound Eect function
(Settings) Sound Sound Mode Settings
The user can select various sound eects.
y Virtual Surround : Enjoy an immersive soundscape with the virtual
multi-channel surround sound eect.
y Equalizer : Set the desired sound by adjusting the equalizer
directly.
y Reset : Reset the sound eect settings.
y This is only available if Sound Mode is set to Standard.
To use TV speaker
(Settings) Sound Sound Out Internal TV Speaker
[Depending on model]
Sound is output through the TV speaker.
To use Headphone
(Settings) Sound Sound Out Wired Headphones
[Depending on model]
Sound is output through the headphone connected to the earphone/
headphone port.
To synchronize audio and video
(Settings) Sound AV Sync Adjustment
[Depending on model]
Synchronizes video and audio directly when they do not match. If you
set AV Sync Adjustment to On, you can adjust the sound output (TV
speakers) to the screen image.
y If you select the Bypass, Outputs the broadcast signals or the sound
from external devices without any audio delay. The audio may be
output before the video because of the time the TV takes to process
the video input.
PIP Setting
(Settings) General PIP
[Depending on model]
y Mode : Shows or hides the sub-screen.
y Sub Input : Select the input on the sub-screen.
y Position : Adjusts the position of the sub-screen.
y Size : Adjusts the size of the sub-screen.
y Sound : Switches to the main screen sound or the sub screen sound.
y The PIP function is only available in the following mode:
- Main : RGB-PC Sub : DTV / ATV / HDMI
- Main : HDMI Sub : DTV / ATV / Component
y The PIP settings can also be set using .
y Press the PIP button on the remote control to show or hide the
sub-screen.
y The PIP function is not available when SIMPLINK is activated.
Setting USB AutoRun
(Settings) General USB AutoRun
Play photos or videos of USB automatically when TV is turned on or
USB is connected.
y Off : Turn o the USB AutoRun.
y Videos : Play videos of USB automatically.
y Photos : Play photos of USB automatically.
y Only plays the les in the top level folder of the USB device in
sequence.
y While playing, press the or button on the remote control
to end this function.
y If the les are invalid or corrupted, the following message appears
before returning to the previous input status: "This le is invalid."
y When the USB device is reconnected after being disconnected
during video playback, Continue watching starts automatically and
resumes the video from the last viewed scene (only applies to the
rst video).
Loading ...
Loading ...
Loading ...