User Manual Frigidaire FFPH1222R1 12,000 btu portable room air conditioner

For your safety all Frigidaire air conditioners feature a 3-
prong grounding plug and current leakage detection device.

These enhanced plugs help to detect damages to the
power cord and can be tested following a few simple steps.

1. Press the reset button
2. Plug the cord into the power outlet
3. Press the test button, the reset button should pop up
4. Press reset button for use
5. Do not use room air conditioner if above test fails.
For more information please consult your use and care
manual.

This feature is a reminder to clean the Air Filter (refer to
Care and Cleaning section of the Use and Care Guide) for
more efficient operation.
The LED light will illuminate after 250 hours of operation.
After cleaning the filter, plug the unit back into the power
source and reset the filter by pressing the ‘Filter Reset’
button and the light will go off.

When this mode is enabled, the selected temperature will
increase by 2 °F 30 minutes after the mode is selected.
The temperature will then increase by another 2 °F after an
additional 30 minutes. This new temperature will be
maintained for 7 hours before returning to the originally
selected temperature.
This ends the “Sleep” mode and the unit will continue to
operate as originally programmed. You may also cancel
sleep mode at any time by again pressing the sleep button

Room Air Conditioners, during operation, may make noise.
It is normal to hear ‘high pitch chatter’ a sound of rushing
air, gurgle/hiss, pinging or swishing and vibration. These
are all normal.
For more definition of noises, please refer to your product’s
Use and Care guide

For most air conditioners, the filter can be found by opening
the front panel. Since it’s a reusable filter, you can simply
remove and clean using warm, soapy water. After cleaning,
allow the filter to dry thoroughly before replacing it. You
may also vacuum the air filter to remove excess dirt and
particles.
For more details regarding the air filter in your specific
model, please reference your Use & Care manual.