Loading ...
Loading ...
Loading ...
5
most suitable for general operation.
3.Defrost the freezing compartment whenever the layer of frost on the
surface of the evaporator reaches 3 or 4 mm. When defrosting
remove all food and set the thermostat at “OFF” position. Put the
drip tray under the evaporator to collect melted water. After the frost
has melted, discard the melted water and dry up the interior of
refrigerator. The refrigerator can then be restarted by turning its
thermostat to the desired setting.
Cautions for Use
1.The more foods tuff put in or the more and the longer for once the
door is opened, the more it needs electric consumption, which even
leads malfunction.
2.Better not to place the objects which are too heavy ,pointed or
corrosion on table board.
3.Re-plugging in the power plug at the interval of over ten minutes.
4.Don’t store bottled drink in the freezer, so as to prevent from being
broken and damaging the refrigerator.
5.Open the door as less as possible during power-cut.
6.When defrosting, never use any sharp or metallic objects to remove
the frost on the surface of the evaporator as it will damage the
evaporator.
7.Don’t touch foods and containers in the freezing compartment with
your wet hands so as to prevent from being frostbitten.
Maintenance
1.While cleaning the refrigerator. pull out the electric power plug, rub
carefully with a piece of cloth soaked with natural cleanser then
wipe with clean water. The abrasive cleaning power, alkali
cleansers, chemical cloth, thinner, alcohol, acid petroleum product
and hot water are not suitable for cleaning the refrigerator, they may
Loading ...
Loading ...
Loading ...