Loading ...
Loading ...
Loading ...
Steam en
17
`Steam
St e a m
With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheat heating modes are available.
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
VarioSteam – Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■ Becomes crispy on the outside
■ Develops a shiny surface
■ Is succulent and tender on the inside
■ Only undergoes a minimum reduction in volume
You set the combination of heating mode and steam
intensity that you want. Use the information in the tables
to select a suitable heating mode and steam intensity.
Alternatively, select a program from the steam
programs. ~ "Tested for you in our cooking studio"
on page 38~ "Programmes" on page 24
Steam intensity
Different intensity levels are available when adding
steam:
■ Low
■ Medium
■ High
Suitable heating modes
You can switch on steam assistance for these heating
modes:
■ CircoTherm hot air ‚
■ Top/bottom heating ƒ
■ Circo-roasting ‡
■ Bread-baking …
■ Keeping warm «
Starting
1. Touch the # touch button.
2. Fill the water tank.
3. Set the type of heating and temperature.
4. Touch the Ž touch button to switch on steam
assistance.
5. On the display, swipe to the left or right to select the
steam intensity.
6. Touch the 8 symbol to apply the setting.
7. Touch the # touch button.
The appliance starts the operation.
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank.
Cancelling steam addition
1. Touch the Ž touch button to cancel the addition of
steam early.
2. Touch the set added steam in the bottom line.
3. On the display, swipe to the left or right to select
"Off".
4. Touch the 8 symbol to apply the setting.
Note: The operation continues without adding steam.
Cancelling appliance operation
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving Œ" heating mode than at room
temperature and does not dry out.
There are two levels available for the Dough proving
setting. Use the information in the tables to select the
appropriate level. ~ "Tested for you in our cooking
studio" on page 38
Note: If the water tank runs dry during operation with
the Dough proving setting, operation is interrupted. Fill
the water tank.
Starting
1. Touch the # touch button.
2. Fill the water tank.
Note: Only switch on the Dough proving setting
once the cooking compartment has completely
cooled down (to room temperature).
3. Swipe to the left or right to select "Dough proving".
4. Touch "1" in the bottom line.
5. Swipe to the left or right to select the required level.
6. Touch the 8 symbol to apply the setting.
7. Touch "+" in the bottom line.
8. Swipe to the left or right to select the required
duration.
9. Touch the 8 symbol to apply the setting.
10. Touch the # touch button.
The appliance starts the operation.
Loading ...
Loading ...
Loading ...