Loading ...
Loading ...
Loading ...
Operation and handling requirements
78
(2) Remove the fuel tank compartment drain
plug to drain the water.
1 Fuel tank compartment drain plug
(3) If the boat was operated in salt water,
wash down the compartment with fresh
water.
(4) Securely install the drain plug in its origi-
nal position.
(5) Close the engine hood.
Draining the bilge water from the hull
Remove the hull drain plug at the stern to
drain the water. Check the condition of the
O-ring on the hull drain plug, and then secure-
ly install the drain plug.
1 Hull drain plug
Draining the bilge water on water
This model is equipped with a self-draining
deck and bilge pump to drain the bilge water
on water.
Self-draining deck
Most water that enters the deck area drains
automatically out the stern through the large
drain holes in the deck.
A one-way check valve in each drain prevents
water from traveling back to the deck while
the boat is moored or moving in reverse.
Bilge pump
Your boat is equipped with a drainage system
that channels water that enters the boat from
the storage compartments to the bilge under
the engine compartment. When the bilge
pump switch is turned on, the bilge pump will
operate.
Even if the bilge pump switch is not turned on,
the bilge pump will detect when there is ex-
cessive water in the bilge and will automati-
cally drain most of it through the bilge pump
outlet. This function works automatically even
if the battery switch is turned to the off posi-
tion.
1 Bilge pump switch
1
1
AERATOR
AUTO
MNL
LIVEWELL BILGE HORN
1
SportsBoat_F4A10.book Page 78 Thursday, September 20, 2018 6:00 PM
Loading ...
Loading ...
Loading ...