Loading ...
Loading ...
Loading ...
(141,1)
北米Model "A1747BE-B" EDITED: 2019/ 12/ 19
& Conventional type ignition
switch
S03AA12
CAUTION
Do not attach a large key holder or
key case to either key. If it hits your
knees or hands while driving, it
could turn the ignition switch to the
“ACC” or “LOCK” position, stop-
ping the engine. Also, if the key is
attached to a keyholder or to a large
bunch of other keys, centrifugal
force may act on it as the vehicle
moves, resulting in unwanted turn-
ing of the ignition switch.
NOTE
If the key cannot be turned, turn the
steering wheel slightly to the left and
right as you turn the ignition switch.
! Switch positions
S03AA1201
Position Description
LOCK
You can insert or remove the
key only in this position. The
steering wheel will be locked
with the key removed.
ACC
You can use the electrical
accessories (audio, acces-
sory power outlet, etc.).
ON
Normal operating position
after starting the engine
START
The engine is started in this
position.
CAUTION
Do not turn the ignition switch to the
“START” position while the engine
is running.
NOTE
. To turn the key from the “ACC” to
“LOCK” position:
– Place the select lever in the “P”
position (CVT models).
– Push in and turn the key.
. If your registered key fails to start
the engine, perform the following pro-
cedure to restart the engine.
(1) Pull out the key once (the secur-
ity indicator light will blink).
(2) Insert the key again.
(3) Return the ignition switch to the
“START” position.
– CONTINUED –
Instruments and controls/Ignition switch
3-5
3
Loading ...
Loading ...
Loading ...