Loading ...
Loading ...
Loading ...
Instrument lighting
The parking lamps or low beams must be
switched on to adjust the brightness.
1. Push button 1 up or down repeatedly until
the appropriate symbol appears in the dis‐
play, accompanied by the brightness set‐
ting and the word "SET".
2. Press button 2.
3. Push button 1 up or down to select the de‐
sired brightness level.
4. Press button 2.
The display again shows the external tem‐
perature and the time.
Interior lamps
General information
The interior lamps, footwell lamps, , cargo area
lamps, and courtesy lamps are controlled auto‐
matically.
The LEDs for the courtesy lamps are set in the
door handles and illuminate the ground in front
of the doors.
To avoid draining the battery, all lamps inside
the car are switched off about 8 minutes after
the ignition is switched off, Start/Stop button,
refer to page 57.
Switching the interior lamps on and
off
Press the button.
To switch off permanently: press the button for
approx. 3 seconds.
To clear this setting: briefly press the button.
Reading lamps
Press the button.
Reading lamps are located at the front and rear
next to the interior lamps.
Danger of burns
Do not reach into the opening of the
lamps; otherwise, there is a risk of burns.◀
Ambient lighting
Depending on the equipment, the interior light‐
ing can be set individually for some lamps.
Selecting the color scheme
1.
"Settings"
2. "Lighting"
3. "Ambient:"
4. Select the desired setting.
Seite 87
Lamps Controls
87
Online Edition for Part no. 01 40 2 911 269 - VI/13
Loading ...
Loading ...
Loading ...