Loading ...
Loading ...
Loading ...
8
Temperature
controls
The temperature controls are preset in the factory at 37°F
for the fresh food compartment and 0°F for the freezer
compartment. Allow 24 hours for the temperature to stabilize
to the preset recommended settings.
The temperature controls can display both the
SET temperature
as well as the actual temperature in the fresh food and freezer
compartments. The actual temperature may vary slightly
from the
SET temperature based on usage and operating
environment.
Setting either or both controls to
OFF stops cooling in both
the freezer and fresh food compartments, but does not shut
off electrical power to the refrigerator.
NOTE: The refrigerat
or is shipped with pr
otective f
ilm covering
the temperature controls. If this film was not removed during
installation, remove it now.
To change the temperature, press and release
the (warmer) or (colder) pad. The SET light
will come on and the display will show the set
temperature. To change the temperature, tap
either the (warmer) or (colder) pad until
the desired temperature is displayed. Fresh food
temperatures can be adjusted between 34°F
and 44°
F and the freezer temperatures can be
adjusted between -6°F and +6°F.
Once the desired temperature has been
set, the temperature display will return to
the actual fresh food and freezer temperatures
after 5 seconds. Several adjustments may
be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach
the temperature you have set.
To turn the cooling system off, tap
the (warmer) pad for either the fresh food
compartment or the freezer until the display
shows OFF.
To turn the unit back on, press
the (colder) pad for either the fresh food
compartment or freezer. The SET light will
illuminate on the side you selected. Then press
the (colder) pad again (on the side wher
e
the SET light is illuminated) and it will go to
the preset points of 0°F for the freezer and 37°F
for the fresh food compartment.
Operating Instructions
Stainless Steel Refrigerator
Performance
Air Flow
System
The P
erformance Air-Flow System is designed to
maximize temperatur
e contr
ol in the fr
esh food
and freezer compar
tments. This unique special
featur
e consists of the Air T
ower along the top
and back w
alls of the fr
esh food compar
tment
and the Air T
unnel on the bottom por
tion of
the fr
eezer rear wall. Placing food in front of
the louv
er
s on these components will not affect
per
formance.
Although the Air T
ower and the Air Tunnel
can be r
emov
ed, doing so will affect temperatur
e
performance. (For r
emov
al instr
uctions, on-line,
24 hour
s a day, contact us at ge.
com or
call 800.444.1845. In Canada, call us at
1.800.561.3344.)
Loading ...
Loading ...
Loading ...