Loading ...
Loading ...
Loading ...
Page |7
Getting started with your appliance
Touch control
A B C
A.
ALARM
When the door has been left open for 3 minutes or
longer, an audible alarm sound is triggered in addition to
a flashing blue LED indicator light above the ALARM
button. Press the button once to temporarily disengage
the ALARM, or close the open door.
• Press and hold the ALARM button for 3 seconds to
disengage permanently the door-open ALARM
function. The key-press will sound once, confirming
the ALARM function has been disengaged.
• Press and hold ALARM for 3 seconds to reengage
the door-open ALARM function.
NOTE: The ALARM function will not operate when the
unit is in Sabbath mode. See the Sabbath Mode
section of Special Functions.
• There are other situations when the ALARM will
sound. See the Troubleshooting section on pg. 13.
B. LOCK
• Press and hold the LOCK button for 3 seconds,
LOCK LED will light up and all buttons will be blocked.
To disengage, press and hold the LOCK button for 3
seconds or until LOCK LED light goes off.
C. LIGHT
Light location is hidden/recessed in ceiling and under
mullion. There are 4 adjustable light settings: no light
(no LED light on control), low (1 LED lite on control),
medium (2 LED lite) and high (3 LED lite on control).
When the door is open, the interior lights automatically
adjust to the maximum intensity (high); lights return to
the selected intensity when the door is closed.
When the lights are already set on high, there will not
be a difference of intensity when the door is open.
D. DISPLAY PANELS
The temperatures are shown in the display panel. The
upper level is for white wines and the lower level is for
red wines. By default, the temperatures sets 46°F for
the upper compartment and 58°F for the lower
compartment..
D E
When the temperature is adjusted, the control panel
flashes the new set-point temperature for 5 seconds,
then reverts to a continuous display of actual
temperatures.
Temperatures in upper and lower compartment are
related and adjust automatically to keep the best
cooling ratio for your red and white wines.
E. SELECTION BUTTONS
The temperature setting is adjusted using the selection
buttons, see chapter “Setting the temperature” for
details.
• Press COOLER (-) to lower the set temperature.
• Press WARMER (+) to raise the set temperature.
Switching the appliance on
The appliance begins to cool when plugged in.
WARNING:
Follow the instructions and recommendations in the
“Connecting the appliance” section in the
Installation Guide for a correct and safe use of your
Wine Reserve.
CAUTION:
Keep hands and fingers away from front and rear
openings of the Wine Reserve door when closing. Risk
of injury to hands or fingers may occur.
Never allow children to climb on or play with the Wine
Reserve door.
Setting the temperature
By default, the temperature set in your Wine Reserve
is 46°F for the upper compartment and 58°F for the
lower compartment; these are the temperatures
recommended but you can adjust the temperature as
you like.
Temperatures in upper and lower compartment are
related and adjust automatically to keep the best
cooling ratio for your red and white wines.
To set a new temperature press the Selection Buttons
COOLER (-) or WARMER (+).
The temperatures will increase or decrease together
by one degree every time the Selection Button is
Loading ...
Loading ...
Loading ...