Loading ...
Loading ...
Loading ...
Use
37
EN
Alarms
Each alarm consists of a message flashing
on the display, the alarm key lighting
up and an audible warning.
The display continues to flash until the alarm
condition finishes.
• To deactivate the alarm, press the
alarm button .
Temperature alarm
The temperature on the display may start to
flash. This means that the temperature inside
the wine cellar compartment is too high or
too low in relation to that set.
This may occur:
• when the appliance is first turned on;
• if a temperature much higher or much
lower than the previous one is set;
• if the wine cellar is loaded with many
bottles at ambient temperature;
• in the event of an extended interruption in
mains voltage.
These conditions may occur during normal
operations of the appliance and are not
caused by problems/faults.
In this case, deactivate the alarm with the
alarm button and wait for the
temperature to return within the normal
storage values. It may be necessary to
repeat this operation 1–2 times.
Other alarm types
The message will appear on the
display on the left. The door has been left
open for more than 60 seconds.
• Close the door.
Messages to (excluding ) or
else or appear on the display on
the left: Appliance fault
• Switch off the appliance and call
Technical Support.
Control lock
To activate the control lock:
• Press and hold the Control lock key
for at least 3 seconds.
To deactivate the control lock:
• Press and hold the Control lock key
for at least 3 seconds.
The alarms help protect the wine
from temperatures which could
compromise its quality.
If the alarm continues to occur, call
Technical Support.
The alarm will reactivate in the
same way 60 seconds after it is
shut off if the door is still open.
This function prevents the
appliance from being accidentally
switched off. When active, the
control panel will not react when
any key is pressed.
Loading ...
Loading ...
Loading ...