Loading ...
Loading ...
Loading ...
8
7. Slide the food pusher down the food chute by
aligning the groove in the food pusher, with
the small protrusion on the inside of the top
of the feed tube.
8. Place the pulp container into position by
tilting and lifting the motor base slightly.
Insert the pulp container under the juicer
cover on the back ensuring it is supported
by the juicer cover and motor base.
9. Fit the lid to the juice jug and position jug
under juice spout.
JUICE JUG
Juice can be preserved in the juice jug for up
to 3 days by following these steps.
1. Lift the lid off the jug and rotate 180°
2. Press down firmly to replace the lid
3. Store juice in the fridge
NOTE
Storage time depends on the ingredients
being juiced and the freshness of the fruit
prior to juicing. Juice must be stored in the
refrigerator between 2°C to 4°C.
Functions
1. Wash your selection of fruit and vegetables
to be juiced. Most fruit and vegetables
such as apples, carrots and cucumbers
will not need to be cut or trimmed to size
as these will fit whole into the feed chute.
Ensure vegetables such as beets, carrots
etc. have all soil removed, are washed
well and trimmed of leaves before using.
2. Plug the power cord into a 240V power outlet.
IMPORTANT
Do not load Feed Chute with produce before
the Juicer has reached the selected speed.
3. Turning the Juicer On
Turn dial to desired speed setting. Turn Dial
to "Fast" range for most juicing needs. For
harder fruits/vegetables and leafy greens
select the "BOOST" range. See Speed
Selector Guide table on the next page to
match speed and produce type for maximum
yield. "Quiet" range, while it may not
maximise yield of some produce, allows you
to extract juice at a significantly lower noise.
4. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract
the maximum amount of juice, always
push the food pusher down slowly.
5. Full Juice Jug
You can keep juicing until the
Juice Jug is filled to max. level.
6. Continuous Juicing
Having just filled and removed a Juice Jug
with fresh juice, you can place an empty
Juice Jug back onto the nozzle and continue
juicing without disassembly. When the Pulp
Container is near full with pulp, turn the
Dial to "Off", remove the Pulp Container
only and empty contents. Replace the empty
Pulp Container and turn Dial to desired
speed selection to continue juicing.
Food
pusher
groove
Small
protrusion
inside
feed tube
Loading ...
Loading ...
Loading ...