Loading ...
Loading ...
Loading ...
Settings
1. Release the backrest, and tilt it forward.
2. Fold the frame up until it engages.
3. Fold back and engage the rear seat back‐
rest.
Fold down the middle section
1.
Fold in the middle head restraint.
2. Reach into the recess and pull the middle
section forward.
Fold back the backrest
Fold up the backrest and press it into the latch.
Make sure that the safety belt is not pinched.
Variable cargo area
floor
With the variable cargo area floor, the cargo
area can be configured corresponding to trans‐
port requirements. To do this, remove the
cargo area floor, and insert it in the desired po‐
sition.
Follow instructions on securing cargo, refer to
page 175.
Removing the cargo floor panel
1. Fold the rear part of the cargo floor panel
upward.
2. Grasp the cargo floor panel in the rear and
fold slightly upward.
3. Pull the cargo floor panel backward from
the brackets.
Proceed in the reverse order to reinstall the
cargo area floor.
Fold up the cargo floor panel
WARNING
Improper use of the variable cargo floor
panel can lead to a danger of objects flying
about during braking and evasive maneuvers.
There is risk of injuries and risk of property
damage.
▷ Do not use the variable cargo floor panel to
separate the cargo area and vehicle interior
in the sense of a partition net.
Seite 179
Cargo area
CONTROLS
179
Online Edition for Part no. 01 40 2 976 545 - X/16
Loading ...
Loading ...
Loading ...