Loading ...
Loading ...
Loading ...
6
INSTALLATION
Important! This new appliance may only be installed and connected by a registered specialist.
Please observe these instructions; otherwise the warranty will not cover any damage that may
occur.
Appliance dimensions
Width 290mm (11.42”)
Depth 520mm (20.5”)
Height 50mm (2.0”)
Countertop cut-out dimensions
Width 273mm (10.75”)
Depth 505mm (19.9”)
Height 150mm (5.9”)
NOTE: If your cutout is closer to 15” than 10.75” wide, you should be using one of our TK15
model cooktops.
NOTE: When preparing the countertop, radius the corners of the cutout (1/4” radius is
typical). This will prevent cracking of the countertop. Follow manufacturer’s instructions
regarding minimum corner radius and reinforcement of corners.
NOTE: To install TK15 models: For wider cutouts, use the stainless steel frame supplied with
your TK15 cooktop. Lay a thin bead of bedding compound along the edge of the cutout,
and then lay the frame over this, pressing down to make a good seal once the frame is
centered. The frame should be as flush with the countertop as possible.
Free space under the cooktop
necessary for ventilation
290
50
Loading ...
Loading ...
Loading ...