Loading ...
Loading ...
Loading ...
5
INSTALLATION
NOTE
If your refrigerator is placed with the door
hinge side against a wall, you may have to
allow additional space for the handle so the
door can be opened wider.
This Use & Care Guide provides general operating
instructions for your model. Use the refrigerator only
as instructed in this Use & Care Guide. Before starting
therefrigerator,followtheseimportantrststeps.
Location
Choose a place that is near a grounded
electrical outlet. Do Not use an extension
cord or an adapter plug.
If possible, place the refrigerator out of
direct sunlight and away from the range,
dishwasher or other heat sources.
The refrigerator must be installed on a
oorthatislevelandstrongenoughto
support a fully loaded refrigerator.
Consider water supply availability for
modelsequippedwithanautomaticice
maker. If you do not hook up water to
the refrigerator, remember to turn the ice
maker off.
Installation
Installation clearances
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides&Top ⅜inch
Back 1 inch
or
2. Attach toe grille to cabinet.
Guidelines for nal positioning of your
refrigerator:
All four corners of the cabinet must rest
rmlyontheoor.
The cabinet should be level at the front and
rear.
The sides should tilt ¼-inch (6 mm) from
front-to-back (to ensure that doors close
and seal properly).
some models
NOTE
In case of future door reversals, save the
toe grille cover not being used.
CAUTION
Do not block the toe grille on the lower front
ofyourrefrigerator.Sufcientaircirculation
is essential for the proper operation of your
refrigerator.
Doors should align with each other and be
level.
To install the toe grille:
1. The toe grille is packaged with the covers
installed. Remove the cover on the side
corresponding with the door hinge bracket.
Loading ...
Loading ...
Loading ...